Fix post-process slot counter going negative after stop(), allowing multiple
packages to extract simultaneously instead of one at a time.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Fix "Fertig" status on completed items: session recovery no longer resets
"Entpacken - Ausstehend" to "Fertig (size)" — respects autoExtract setting
- Extraction continues during pause instead of being aborted
- Hybrid extraction recovery on start/resume: triggerPendingExtractions and
recoverPostProcessingOnStartup now handle partial packages with hybridExtract
- Move Up/Down buttons: optimistic UI update so packages move instantly
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Add proactive disk-busy detection: lower STREAM_HIGH_WATER_MARK from 2 MB
to 512 KB so backpressure triggers sooner, and monitor stream.writableLength
to show "Warte auf Festplatte" after 300 ms of undrained writes — before
actual backpressure hits.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Fix hybrid extraction stalling: requeue loop now keeps the post-process
slot so the same package re-runs immediately without waiting behind other
packages. Also skip already-extracted archives on requeue rounds.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Fix hybrid extract not using maxParallelExtract setting (was hardcoded to 1)
- Fix "Warten auf Parts" label shown for items whose downloads are already complete
- Update hybrid extract progress handler to support parallel archive tracking
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- WRONG_PASSWORD JVM error now falls back to legacy UnRAR extractor
- Added masked password logging for JVM and legacy extractors
- Per-attempt password logging shows which passwords are tried and in what order
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
maxParallelExtract now controls how many archives extract simultaneously
within a single package (e.g. 4 episodes at once). Packages still
extract sequentially (one package at a time) to focus I/O. Progress
handler updated to track multiple active archives independently.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Previously maxParallelExtract allowed multiple packages to extract
simultaneously, splitting I/O across packages. Now packages extract
one at a time in packageOrder so each package finishes faster.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
When SevenZipJBinding reports "Archive file can't be opened with any
of the registered codecs", the extractor now falls back to legacy
UnRAR instead of failing immediately. Previously, backend mode "jvm"
(the production default) only allowed fallback for UNSUPPORTEDMETHOD.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Fortschritt column is now clickable/sortable (ascending/descending by package %)
- Extraction queue respects packageOrder: top packages get extracted first
- Packages currently extracting are auto-expanded so user can see progress
- Increased Fortschritt column width for better spacing
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- New setting maxParallelExtract in AppSettings
- UI input in Entpacken tab: "Parallele Entpackungen"
- Replaces hardcoded maxConcurrent=2 in acquirePostProcessSlot
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Each JVM extractor process now gets its own temp directory via
-Djava.io.tmpdir so parallel SevenZipJBinding instances don't fight
over the same lib7-Zip-JBinding.dll file lock on Windows.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
The previous targetPath-only matching missed items whose targetPath
differed from the on-disk filename. Now matches by basename and
fileName for reliable archive-part to item association.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Replace serial packagePostProcessQueue with semaphore (max 2 concurrent)
- Hybrid-extract: items waiting for parts show "Entpacken - Warten auf Parts"
- Failed hybrid extraction shows "Entpacken - Error" instead of "Fertig"
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
findNextQueuedItem(), hasQueuedItems(), hasDelayedQueuedItems() and
countQueuedItems() now skip packages not in runPackageIds when the set
is non-empty. This ensures "Ausgewählte Downloads starten" only
processes selected packages instead of all enabled ones.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Restore all source files from v1.5.49 (proven stable on both servers)
- Add startPackages() IPC method that starts only specified packages
- Fix context menu "Ausgewählte Downloads starten" to use startPackages()
instead of start() which was starting ALL enabled packages
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Require near-complete file size checks in Item-Recovery and hybrid ready-set detection so partially downloaded RAR parts are not marked completed and extracted prematurely.
- Add automatic retry with 3s delay when JVM extractor fails with
"codecs" or "can't be opened" error during hybrid-extract mode
(handles transient Windows file locks after download completion)
- Log archive file size before JVM extraction in hybrid mode
- Remove unused ArchiveFormat import, RAR_MULTIPART_RE/RAR_OLDSPLIT_RE
patterns, and hasOldStyleRarSplits() method from Java extractor
- Keep simple openSevenZipArchive with currentVolumeName tracking
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
The previous fix blocked ALL multi-part extractions when any item in the
package was pending. Now checks only parts of the SAME archive (by prefix
match on fileName/targetPath), so E01 can extract while E06 downloads.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- findReadyArchiveSets: for .part1.rar, require ALL package items
to be terminal before allowing extraction (prevents premature
extraction when later parts have no targetPath/fileName yet)
- JVM extractor: remove CRCERROR from isPasswordFailure() — only
DATAERROR indicates wrong password. CRCERROR on archives where
7z-JBinding falsely reports encrypted no longer triggers password
cycling.
- looksLikeWrongPassword: remove CRC text matching, keep only
explicit "data error" for encrypted archives.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Account Manager: table UI with add/remove/check for all 4 providers
(Real-Debrid, Mega-Debrid, BestDebrid, AllDebrid)
- Backend: checkRealDebridAccount, checkAllDebridAccount, checkBestDebridAccount
- Hybrid-Extract fix: check item.fileName for queued items without targetPath,
disable disk-fallback for multi-part archives, extend disk-fallback to catch
active downloads by fileName match (prevents CRC errors on incomplete files)
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Scrapes the Mega-Debrid profile page to display username, premium status,
remaining days, and loyalty points. New "Account prüfen" button in Settings > Accounts.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Encrypt sensitive credentials (tokens, passwords) in backup exports
using AES-256-GCM with PBKDF2 key derivation from OS username
- Backup format v2 with backwards-compatible v1 import
- Show dialog to create non-existent directories when changing
outputDir, extractDir, or mkvLibraryDir settings
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Root cause: SevenZip.initSevenZipFromPlatformJAR() was never called, so
native compression codecs (RAR5, LZMA2, etc.) were not loaded. Archives
could be opened (header parsing is pure Java) but all extractSlow() calls
returned UNSUPPORTEDMETHOD because no native decoder was available.
- Add ensureSevenZipInitialized() with lazy init before extraction
- Pass password to extractSlow(outStream, password) for RAR5 compatibility
- Add UNSUPPORTEDMETHOD -> legacy fallback in extractor.ts as safety net
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Java's getCanonicalFile() resolves subst drives inconsistently,
causing secureResolve() to falsely block valid filenames. JVM handles
long paths natively so subst is only needed for legacy UnRAR/7z.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
The JVM sidecar class files were packed inside app.asar where Java
cannot access them. asarUnpack extracts them to app.asar.unpacked/.
Default backend changed from auto to jvm (no legacy fallback).
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- New JVM sidecar (resources/extractor-jvm/) using SevenZipJBinding for
RAR/7z/TAR and Zip4j for ZIP multipart, matching JDownloader 2 stack
- Auto/JVM/Legacy backend modes via RD_EXTRACT_BACKEND env variable
- Fallback to legacy UnRAR/7z when JVM runtime unavailable
- Fix isJvmRuntimeMissingError false positives on valid extraction errors
- Cache JVM layout resolution to avoid repeated filesystem checks
- Route nested ZIP extraction through JVM backend consistently
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- setWindowsBackgroundIO (Very Low I/O) now only applied in hybrid mode,
not for all extractions (was causing massive slowdown)
- Hybrid threads changed from -mt1 to half CPU count (e.g. -mt4 on 8-core)
- Move retry count (R9, R22 etc.) from status text to tooltip only
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- normalizeSessionStatuses: reset all queued items to "Wartet" instead of
only checking a few specific patterns (missed Retry, Unrestrict-Fehler etc.)
- Reset completed items with stale extraction status to "Fertig (size)"
- stop(): reset all non-finished items to queued/"Wartet" and packages to queued
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Add disk space check before extraction (aborts if insufficient space)
- Add single-level nested archive extraction (archives inside archives)
- Blacklist .iso/.img/.bin/.dmg from nested extraction
- Set real Windows I/O priority (Very Low) on UnRAR via NtSetInformationProcess
- Reduce UnRAR threads to -mt1 during hybrid extraction
- Fix double episode renaming (s01e01e02 pattern)
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Items with transient status texts like Provider-Cooldown, Warte auf
Daten, Verbindungsfehler are reset to "Wartet" when the app restarts,
so they don't show misleading status from a previous session.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Debounce: simultaneous failures within 2s count as 1 failure
(prevents 8 parallel unrestrict failures from instant-triggering)
- Raise threshold from 8 to 20 consecutive failures before cooldown
- Escalation tiers: 20→30s, 35→60s, 50→120s, 80+→300s
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Pause now aborts active extractions (previously extraction continued
during pause, showing wrong status like Provider-Cooldown)
- Unpause clears provider circuit breaker for fresh start
- Post-processing status checks account for global pause state
- Reduce stall detection timeout from 30s to 15s for faster retry
- Reduce stall retry base delay from 500ms to 300ms
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Add pause check at top of processItem retry loop so items show
"Pausiert" instead of "Provider-Cooldown" when paused
- Lower extraction process priority from BELOW_NORMAL to IDLE
(IDLE_PRIORITY_CLASS on Windows also lowers I/O priority, reducing
disk contention between extraction and active downloads)
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Make saveSettings async to stop blocking the event loop during downloads
- Add 120ms minimum gap for forced state emissions to prevent rapid-fire IPC
- Fix circuit breaker feedback loop: reset failure count after cooldown expires
- Add 120s time-decay for failure counter (transient bursts don't snowball)
- Raise circuit breaker threshold from 5 to 8 consecutive failures
- Stop counting network stalls as provider failures
- Items without a provider only check primary provider cooldown, not all
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- New "Jetzt entpacken" right-click option: triggers extraction for
completed packages regardless of paused/stopped state
- Fix 5-10s freeze when pressing Start after Pause: recoverRetryableItems
was calling fs.stat on every item (474+); now only checks failed/completed
- Full IPC pipeline: extractNow in manager, controller, preload, renderer
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
WinRAR doesn't support \?\ prefix (interprets it as UNC network path).
Replace with subst drive mapping: maps targetDir to a short drive letter
(Z:, Y:, etc.) before extraction, then removes mapping after. This keeps
total paths under 260 chars even when archives contain deep internal
directory structures.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Add longPathForWindows() helper that prefixes extract target directories
with \?\ on Windows, bypassing the 260-char MAX_PATH limit. Applied to
both WinRAR/UnRAR and 7z arguments. Fixes "Die Syntax für den
Dateinamen, Verzeichnisnamen" errors when archive internal directories
create deeply nested output paths.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Right-click packages with extraction errors shows "Extraktion
wiederholen" option to manually retry
- Increase WinRAR error text from 240 to 500 chars for better
diagnostics in logs
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- triggerPendingExtractions() now runs when unpausing, so packages
with extraction errors are automatically retried
- executeDeleteSelection no longer depends on snapshot objects
(prevents unnecessary re-renders with large queues)
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Session counter now uses sessionDownloadedBytes (in-memory counter)
instead of summing completed items. Removing packages after extraction
no longer resets the session total.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Save settings every 30s during active downloads (not just session)
- Force settings save on shutdown and run finish
- Preserve live totalDownloadedAllTime when user saves settings
(app-controller's stale copy no longer overwrites the counter)
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Pause button is now one-way (orange glow when paused, disabled when
already paused). Start button resumes from pause.
- Fix hybrid extraction attempting incomplete multi-part archives when
paused: disk-fallback now blocks any non-terminal item status, not
just downloading/validating/integrity_check.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Track totalDownloadedAllTime in settings (persists across restarts)
- Track sessionDownloadedBytes for current app session
- Status bar shows both: Session + Gesamt
- Statistics section shows Heruntergeladen (Session) + (Gesamt)
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Track packageId in speed events so package speed uses same 3-second
window as global speed (fixes mismatch between package and status bar)
- Add packageSpeedBps to UiSnapshot, computed from speed events
- Context menu delete actions now respect confirmDeleteSelection setting
- Progress bar visible even when package is collapsed
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Fix Ctrl+Click: mousedown no longer immediately adds item, preventing
onClick from toggling it back off. Drag-select still works via mouseenter.
- Delete key removes selected items/packages with JDownloader-style
confirmation dialog showing count and remaining items.
- "Nicht mehr anzeigen" checkbox disables future confirmations.
- New setting "Vor dem Löschen bestätigen" under Allgemein.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Dead link detection:
- Mega-Web: parse hoster error messages (hosterNotAvailable, etc.) from HTML
and throw specific error instead of returning null
- MegaDebridClient: stop retrying on permanent hoster errors
- download-manager: isPermanentLinkError() immediately fails items with dead
links instead of retrying forever
Extraction race condition:
- package_done cleanup policy checked if all items were "completed" (downloaded)
but not if they were "extracted" — removing the package before the last
episode could be extracted
- Both applyCompletedCleanupPolicy and applyPackageDoneCleanup now guard
against premature removal when autoExtract is enabled
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- HTTP 200 on resume: detect server ignoring Range header, write in truncate mode
instead of appending (prevents doubled/corrupted files)
- HTTP 416 without Content-Range: assume complete if >1MB exists instead of
deleting potentially multi-GB finished files
- Stream handle leak: explicit destroy() after finally to prevent fd exhaustion
- Drain timeout: don't abort controller on disk backpressure, let inner retry
loop handle it instead of escalating to full stall pipeline
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Provider circuit breaker: track consecutive failures per provider with
escalating cooldowns (30s/60s/120s/300s), auto-invalidate Mega-Debrid
session on cooldown
- Escalating backoff: retry delays now scale up to 120s (was 30s max),
unrestrict backoff exponential instead of linear 15s cap
- Shelve logic: after 15 consecutive failures, item pauses 5 min with
counter halving for gradual recovery
- Periodic soft-reset: every 10 min, reset stale retry counters (>10 min
queued) and old provider failures (>15 min), acts like mini-restart
- Mega-Debrid queue timeout: 90s wait limit in runExclusive to prevent
cascade blocking behind stuck calls
- Provider-cooldown-aware retry delays: items wait for provider cooldown
instead of retrying against broken service
- Fix: reconnect/package_toggle now persist retry counters (previously
lost on interruption, defeating shelve logic)
- Mega-Debrid generate: tighter timeouts, progressive reload backoff,
hoster retry limit (5x max)
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Some hosters return tiny error responses (e.g. 9 bytes) with HTTP 200.
- downloadToFile: detect files <512 B, log content, delete and throw for retry
- Post-download: catch <512 B files even when totalBytes is unknown
- Logs the error-page content for debugging
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Fix .z001/.z002 split zip volumes not deleted after extraction
(regex matched only 2-digit, now matches 2-3 digit volumes)
- Make extract progress file writes atomic (write to .tmp then rename)
to prevent corruption on crash during extraction
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Keep existing good filename when debrid API returns "download.bin"
or opaque name. Only overwrite item.fileName if the resolved name
is actually better (not opaque, not download.bin).
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
When post-processing runs, detect items in idle states (queued/paused)
whose target file already exists on disk with non-zero size, and
auto-recover them to "completed" status. This ensures allDone becomes
true, triggering final extraction with archive cleanup (delete mode).
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Add disk-fallback to findReadyArchiveSets: when all archive parts
physically exist on disk with non-zero size and none are actively
downloading/validating, consider the archive ready for extraction.
This fixes episodes being skipped when a download item's status
was not updated to "completed" despite the file being fully written.
Also improve debug server: raise log limit to 10000 lines,
add grep filter, add /session endpoint for raw session data.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Starts an HTTP server on port 9868 (configurable via debug_port.txt)
when debug_token.txt exists in the app runtime directory. Provides
/health, /log, /status, and /items endpoints for live monitoring.
Token-based auth required.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
The validating-stuck timeout (45s) was shorter than the unrestrict
timeout (60s), causing items to be endlessly aborted and retried
before the debrid API call could complete. Now uses unrestrict
timeout + 15s buffer.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
