DDownload's storage servers (dstorage.org) use certificates that fail
Node.js TLS verification. Add skipTlsVerify flag to UnrestrictedLink
and temporarily disable TLS verification for the download fetch when
the flag is set.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- DDownload (ddownload.com/ddl.to) as new hoster with web login
- Post-processing labels: Entpacken/Renaming/Aufräumen/MKVs
- Release notes shown in update confirmation dialog
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
When hybrid extraction finds no ready archive sets (because remaining parts
are still downloading), completed items were incorrectly labeled as
"Entpacken - Ausstehend" instead of "Entpacken - Warten auf Parts".
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Fix post-process slot counter going negative after stop(), allowing multiple
packages to extract simultaneously instead of one at a time.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Fix "Fertig" status on completed items: session recovery no longer resets
"Entpacken - Ausstehend" to "Fertig (size)" — respects autoExtract setting
- Extraction continues during pause instead of being aborted
- Hybrid extraction recovery on start/resume: triggerPendingExtractions and
recoverPostProcessingOnStartup now handle partial packages with hybridExtract
- Move Up/Down buttons: optimistic UI update so packages move instantly
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Add proactive disk-busy detection: lower STREAM_HIGH_WATER_MARK from 2 MB
to 512 KB so backpressure triggers sooner, and monitor stream.writableLength
to show "Warte auf Festplatte" after 300 ms of undrained writes — before
actual backpressure hits.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Fix hybrid extraction stalling: requeue loop now keeps the post-process
slot so the same package re-runs immediately without waiting behind other
packages. Also skip already-extracted archives on requeue rounds.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Fix hybrid extract not using maxParallelExtract setting (was hardcoded to 1)
- Fix "Warten auf Parts" label shown for items whose downloads are already complete
- Update hybrid extract progress handler to support parallel archive tracking
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
maxParallelExtract now controls how many archives extract simultaneously
within a single package (e.g. 4 episodes at once). Packages still
extract sequentially (one package at a time) to focus I/O. Progress
handler updated to track multiple active archives independently.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Previously maxParallelExtract allowed multiple packages to extract
simultaneously, splitting I/O across packages. Now packages extract
one at a time in packageOrder so each package finishes faster.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Fortschritt column is now clickable/sortable (ascending/descending by package %)
- Extraction queue respects packageOrder: top packages get extracted first
- Packages currently extracting are auto-expanded so user can see progress
- Increased Fortschritt column width for better spacing
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- New setting maxParallelExtract in AppSettings
- UI input in Entpacken tab: "Parallele Entpackungen"
- Replaces hardcoded maxConcurrent=2 in acquirePostProcessSlot
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
The previous targetPath-only matching missed items whose targetPath
differed from the on-disk filename. Now matches by basename and
fileName for reliable archive-part to item association.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Replace serial packagePostProcessQueue with semaphore (max 2 concurrent)
- Hybrid-extract: items waiting for parts show "Entpacken - Warten auf Parts"
- Failed hybrid extraction shows "Entpacken - Error" instead of "Fertig"
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
findNextQueuedItem(), hasQueuedItems(), hasDelayedQueuedItems() and
countQueuedItems() now skip packages not in runPackageIds when the set
is non-empty. This ensures "Ausgewählte Downloads starten" only
processes selected packages instead of all enabled ones.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Restore all source files from v1.5.49 (proven stable on both servers)
- Add startPackages() IPC method that starts only specified packages
- Fix context menu "Ausgewählte Downloads starten" to use startPackages()
instead of start() which was starting ALL enabled packages
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Require near-complete file size checks in Item-Recovery and hybrid ready-set detection so partially downloaded RAR parts are not marked completed and extracted prematurely.
The previous fix blocked ALL multi-part extractions when any item in the
package was pending. Now checks only parts of the SAME archive (by prefix
match on fileName/targetPath), so E01 can extract while E06 downloads.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- findReadyArchiveSets: for .part1.rar, require ALL package items
to be terminal before allowing extraction (prevents premature
extraction when later parts have no targetPath/fileName yet)
- JVM extractor: remove CRCERROR from isPasswordFailure() — only
DATAERROR indicates wrong password. CRCERROR on archives where
7z-JBinding falsely reports encrypted no longer triggers password
cycling.
- looksLikeWrongPassword: remove CRC text matching, keep only
explicit "data error" for encrypted archives.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Account Manager: table UI with add/remove/check for all 4 providers
(Real-Debrid, Mega-Debrid, BestDebrid, AllDebrid)
- Backend: checkRealDebridAccount, checkAllDebridAccount, checkBestDebridAccount
- Hybrid-Extract fix: check item.fileName for queued items without targetPath,
disable disk-fallback for multi-part archives, extend disk-fallback to catch
active downloads by fileName match (prevents CRC errors on incomplete files)
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- normalizeSessionStatuses: reset all queued items to "Wartet" instead of
only checking a few specific patterns (missed Retry, Unrestrict-Fehler etc.)
- Reset completed items with stale extraction status to "Fertig (size)"
- stop(): reset all non-finished items to queued/"Wartet" and packages to queued
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Add disk space check before extraction (aborts if insufficient space)
- Add single-level nested archive extraction (archives inside archives)
- Blacklist .iso/.img/.bin/.dmg from nested extraction
- Set real Windows I/O priority (Very Low) on UnRAR via NtSetInformationProcess
- Reduce UnRAR threads to -mt1 during hybrid extraction
- Fix double episode renaming (s01e01e02 pattern)
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Items with transient status texts like Provider-Cooldown, Warte auf
Daten, Verbindungsfehler are reset to "Wartet" when the app restarts,
so they don't show misleading status from a previous session.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Debounce: simultaneous failures within 2s count as 1 failure
(prevents 8 parallel unrestrict failures from instant-triggering)
- Raise threshold from 8 to 20 consecutive failures before cooldown
- Escalation tiers: 20→30s, 35→60s, 50→120s, 80+→300s
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Pause now aborts active extractions (previously extraction continued
during pause, showing wrong status like Provider-Cooldown)
- Unpause clears provider circuit breaker for fresh start
- Post-processing status checks account for global pause state
- Reduce stall detection timeout from 30s to 15s for faster retry
- Reduce stall retry base delay from 500ms to 300ms
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Add pause check at top of processItem retry loop so items show
"Pausiert" instead of "Provider-Cooldown" when paused
- Lower extraction process priority from BELOW_NORMAL to IDLE
(IDLE_PRIORITY_CLASS on Windows also lowers I/O priority, reducing
disk contention between extraction and active downloads)
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Make saveSettings async to stop blocking the event loop during downloads
- Add 120ms minimum gap for forced state emissions to prevent rapid-fire IPC
- Fix circuit breaker feedback loop: reset failure count after cooldown expires
- Add 120s time-decay for failure counter (transient bursts don't snowball)
- Raise circuit breaker threshold from 5 to 8 consecutive failures
- Stop counting network stalls as provider failures
- Items without a provider only check primary provider cooldown, not all
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- New "Jetzt entpacken" right-click option: triggers extraction for
completed packages regardless of paused/stopped state
- Fix 5-10s freeze when pressing Start after Pause: recoverRetryableItems
was calling fs.stat on every item (474+); now only checks failed/completed
- Full IPC pipeline: extractNow in manager, controller, preload, renderer
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Right-click packages with extraction errors shows "Extraktion
wiederholen" option to manually retry
- Increase WinRAR error text from 240 to 500 chars for better
diagnostics in logs
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- triggerPendingExtractions() now runs when unpausing, so packages
with extraction errors are automatically retried
- executeDeleteSelection no longer depends on snapshot objects
(prevents unnecessary re-renders with large queues)
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Session counter now uses sessionDownloadedBytes (in-memory counter)
instead of summing completed items. Removing packages after extraction
no longer resets the session total.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Save settings every 30s during active downloads (not just session)
- Force settings save on shutdown and run finish
- Preserve live totalDownloadedAllTime when user saves settings
(app-controller's stale copy no longer overwrites the counter)
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Pause button is now one-way (orange glow when paused, disabled when
already paused). Start button resumes from pause.
- Fix hybrid extraction attempting incomplete multi-part archives when
paused: disk-fallback now blocks any non-terminal item status, not
just downloading/validating/integrity_check.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Track totalDownloadedAllTime in settings (persists across restarts)
- Track sessionDownloadedBytes for current app session
- Status bar shows both: Session + Gesamt
- Statistics section shows Heruntergeladen (Session) + (Gesamt)
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Track packageId in speed events so package speed uses same 3-second
window as global speed (fixes mismatch between package and status bar)
- Add packageSpeedBps to UiSnapshot, computed from speed events
- Context menu delete actions now respect confirmDeleteSelection setting
- Progress bar visible even when package is collapsed
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Dead link detection:
- Mega-Web: parse hoster error messages (hosterNotAvailable, etc.) from HTML
and throw specific error instead of returning null
- MegaDebridClient: stop retrying on permanent hoster errors
- download-manager: isPermanentLinkError() immediately fails items with dead
links instead of retrying forever
Extraction race condition:
- package_done cleanup policy checked if all items were "completed" (downloaded)
but not if they were "extracted" — removing the package before the last
episode could be extracted
- Both applyCompletedCleanupPolicy and applyPackageDoneCleanup now guard
against premature removal when autoExtract is enabled
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- HTTP 200 on resume: detect server ignoring Range header, write in truncate mode
instead of appending (prevents doubled/corrupted files)
- HTTP 416 without Content-Range: assume complete if >1MB exists instead of
deleting potentially multi-GB finished files
- Stream handle leak: explicit destroy() after finally to prevent fd exhaustion
- Drain timeout: don't abort controller on disk backpressure, let inner retry
loop handle it instead of escalating to full stall pipeline
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Provider circuit breaker: track consecutive failures per provider with
escalating cooldowns (30s/60s/120s/300s), auto-invalidate Mega-Debrid
session on cooldown
- Escalating backoff: retry delays now scale up to 120s (was 30s max),
unrestrict backoff exponential instead of linear 15s cap
- Shelve logic: after 15 consecutive failures, item pauses 5 min with
counter halving for gradual recovery
- Periodic soft-reset: every 10 min, reset stale retry counters (>10 min
queued) and old provider failures (>15 min), acts like mini-restart
- Mega-Debrid queue timeout: 90s wait limit in runExclusive to prevent
cascade blocking behind stuck calls
- Provider-cooldown-aware retry delays: items wait for provider cooldown
instead of retrying against broken service
- Fix: reconnect/package_toggle now persist retry counters (previously
lost on interruption, defeating shelve logic)
- Mega-Debrid generate: tighter timeouts, progressive reload backoff,
hoster retry limit (5x max)
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Some hosters return tiny error responses (e.g. 9 bytes) with HTTP 200.
- downloadToFile: detect files <512 B, log content, delete and throw for retry
- Post-download: catch <512 B files even when totalBytes is unknown
- Logs the error-page content for debugging
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Keep existing good filename when debrid API returns "download.bin"
or opaque name. Only overwrite item.fileName if the resolved name
is actually better (not opaque, not download.bin).
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
When post-processing runs, detect items in idle states (queued/paused)
whose target file already exists on disk with non-zero size, and
auto-recover them to "completed" status. This ensures allDone becomes
true, triggering final extraction with archive cleanup (delete mode).
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Add disk-fallback to findReadyArchiveSets: when all archive parts
physically exist on disk with non-zero size and none are actively
downloading/validating, consider the archive ready for extraction.
This fixes episodes being skipped when a download item's status
was not updated to "completed" despite the file being fully written.
Also improve debug server: raise log limit to 10000 lines,
add grep filter, add /session endpoint for raw session data.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
